Panasonic SC-HG1 Series Reference Manual page 147

(2) Setting module parameters (when using the CC-Link IE Field master/local module)
Next, configure the module parameters.
Under [Required Settings], set [Network Number].
Under [Basic Settings], set [Network Configuration Settings] and [Link Refresh Settings].
Navigation window → Parameter → Module information→ (Start XY): RJ71EN71 → Module parameter
Set the network number as needed.
Figure 1.5.4-5: Module parameters (required settings)
Figure 1.5.4-6: Module parameters (basic settings)
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
WUME-SCHG1IQRFB-1
147/184