Appendix 1.3. Connectable Models; Appendix 1.4. Wiring To The Communication Unit - Panasonic SC-HG1 Series Reference Manual

Appendix 1.3. Connectable models
This FB library allows you to check and change the settings of the following models.
You can use the FBs in this FB library without depending on the difference between the master device and slave devices
(whether they are cable or wire saving type).
Appendix 1.4. Wiring to the communication unit
The power to SC-HG1-C/SC-HG1-CEF is supplied from the master device via the horizontal coupling connector.
Be sure to connect the horizontal coupling connector.
(Note 1): Select termination resistors suitable for the cables you are using and connect them to the stations on both ends of
the line.
Type
Master device
Slave device
Before wiring the devices, turn off the power.
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Model name
HG-SC101
HG-SC111
Cable type
HG-SC112
Wire saving type HG-SC113
135/184
WUME-SCHG1IQRFB-1