Read Off Usage Time - Weinmann homecare SOMNOvent ST Description Of The Equipment And Instructions For Use

44
3. Remove the tube connection and the ex-
halation system from the mask.
4. Clean the mask and the exhalation sys-
tem (see "6. Hygienic preparation" on
page 48).
Important !
SOMNOvent ST In standby mode, the
SOMNOvent ST uses approx. 3,5 watts. To
save electricity, you can remove the mains plug
from the socket when the appliance is not be-
3
ing used. The stored values and settings will
not be lost.

5.6 Read off usage time

SOMNOvent ST saves the data from 366
days and the associated therapy time. You
can display the following values:
• Total usage time in hours,
• Average therapy time per day,
• Therapy time of current day including
date.
Note: A calendar day always starts and ends
at 12 noon.
The total usage time is always shown for a
few seconds when the unit is switched on. To
read off further data, proceed as follows:
1. When switching off the unit hold down
the on / off switch
time (bottom line) and the average usage
time per day (top line) is shown in the
display.
2. Then release the button. After a few
seconds the date and the saved therapy
time for the current day will appear.
3. Press the softstart button
therapy time for the previous days.
English
until the total usage
27
to read off the
29