Setup Of Equipment; Setting Up And Connecting The Somnocomfort 2E - Weinmann SOMNOcomfort 2e Description Of The Equipment And Instructions For Use

3. Setup of Equipment

3.1 Setting up and connecting the SOMNOcomfort 2e

1. Set up the unit on a flat surface, e.g. on the bedside cabinet or on the floor next to
the bed.
Caution!
Do not cover the unit or power pack. Do not use in the vicinity of a heater or in direct
sunlight. The unit may overheat, resulting in insufficient therapy delivery and damage
to the unit.
2. Plug the power supply cable into the supply connection of the SOMNOcomfort 2e.
Then plug the power pack into a socket outlet (using the power supply cable).
Power pack
DC adapter
The power pack automatically determines the
appropriate mains voltage (115 V - 230 V).
The display shows "0" for standby, together with "A"
or "M" according to the appropriate setting on the
automatic on/off switch
3. If SOMNOcomfort 2e is to be operated with a voltage
of 12 or 24 V DC, connect the WM 24469 DC adapt-
er (available as an option) instead of the power pack.
4. Plug the breathing hose into the socket outlet
adapter.
5. Lock the cover by pushing the breathing hose adapter
into the unit outlet until it latches in place.
Setup of Equipment
15
EN