Exhaust Diverter Installation - Peco 22131501 Operator's Manual

Exhaust Diverter Installation

This Exhaust Diverter P#(J0150) is used to divert the mower's exhaust directly away from your Drive unit to prevent
any damage that may occur. Position and install the Exhaust Diverter P#(J0150) onto the end of the exhaust of your
mower, make sure the Exhaust Diverter is angled 20° down and away from the mower, see Figure A below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Exhaust Diverter
Engine Drive
This Exhaust Diverter P#(J0251) is used to divert the exhaust directly away from the mower to prevent any damage
that may occur. Position and install the Exhaust Deflector P#(J0251) onto the end of the exhaust of the Engine Drive
Assembly, make sure the Exhaust Deflector is pointed downwards.
Secure the Exhaust Deflector onto the Exhaust by using (1) Self-Drilling Screw P#(K1504), see Figure B below.
Figure B
Use the Self-Drilling
Screw to secure
the Exhaust Deflector Exhaust Diverter
18