Upper Frame Bracket Installation - Peco 22131501 Operator's Manual

Upper Frame Bracket Installation

First, align the left most bolt holes of the Upper Right Frame Bracket (Item #1) to the upper right bolt holes of the Rear
Frame Bracket. Then, secure the Upper Rt Frame Bracket to the Rear Frame Bracket relatively loose by using (2)
3/8"-16 x 1" Carriage Bolts (Item #3) and (2) 3/8"-16 Ny-Flange Lock Nuts (Item #4). Refer to Figure A.
Next, align the (2) right most bolt holes of the Upper Rt Frame Bracket between the mower's ROPS. Finally, secure
the right side of the Upper Rt Frame Bracket by using (1) 3/8"-16 U-Bolt (Item #5) and (2) 3/8"-16 Ny-Flange Lock
Nuts (Item #4). Tighten all hardware at this time. Repeat the procedures for the Upper Left Frame Bracket (Item #2)
on the opposite side. See Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
9