SAFETY WARNING! NEVER operate the mower unless the discharge guard and either the deflector assembly or the vacuum collector adapter are fastened securely in place. WARNING! Do not work around the mower deck boot or the blower area until you are certain that the mower blades and the blower impeller have stopped rotating.
PECO elects, without charge if the defect appears within 90 days from the date of installation of such part or before the expiration of the original warranty period, whichever is later.
INTRODUCTION AND DESCRIPTION 1-1 Introduction Removing The Weight Kit We are pleased to have you as a PECO customer. Your collection system has been designed to give you a low Remove the two carriage bolts and flange nuts that maintenance, simple, and effective way to collect the fasten the two existing weight bars to the rear frame of grass clippings from your mower.
Figure 2-1c Figure 2-2a 1/2”-13 x 1” HHCS 1/2”-13 FLANGE NUT LESCO CADET REMOVE EXISTING HARDWARE RIGHT LOWER EXISTING MOUNT PLATE HARDWARE Figure 2-2b 1/2”-13 x 1” HHCS 1/2”-13 FLANGE NUT Rotating The Donaldson Air Cleaner Note: If equipped with a Donaldson air cleaner, unit must be rotated to make clearance for top main frame assembly.
2-4 Exhaust Deflector Installation 2-6 Engine Mount Arm Assembly Installation Fasten the exhaust deflector P#(C0058) to the underside of the right lower mount plate P#(B0396) and fasten Insert the engine mount arm assembly P#(A0976) into using (2) 1/4”-20 x 3/4” HHCS and (2) 1/4”-20 nyloc nuts. the outer engine mount tube P#(A0977) and fasten with See Figure 2-4.
2-8 Lift Handle Installation Figure 2-9 The various parts of the handle assembly P#(A0273) must be attached to the container frame. Page 11shows the orientation and location of the components. Slide the lift handle into the slot in the handle mount bracket P#(B1730) on the grass container.
Page 11
MODEL#: 21621209 MOWER NAME: CUB CADET MOWER MODEL: TANK MOWER DECK SIZE: 48” 54” 60” VAC NAME: 12 CUBIC FOOT PRO 12 FOR YEAR: 2007-2006 5.5HP BRIGGS & STRATTON REVISED: BOM0325 A0998 UNIT ASSEMBLY 7” x 35” 6” x 38”...
Page 12
P P P P P MODEL#: 21621215 PECO PECO PECO PECO PECO PECO MOWER NAME: CUB CADET MOWER MODEL: TANK MOWER DECK SIZE: 48”,54” & 60” VAC NAME: 12 CUBIC FOOT PRO 12 FOR YEAR: 2006 - 2008 6.5HP BRIGGS AND STRATTON VANGUARD...
Page 13
MODEL#: 33621205 MOWER NAME: LESCO MOWER MODEL: Z2 MOWER DECK SIZE: 48” 54” & 60” VAC NAME: 12 CUBIC FOOT PRO 12 FOR YEAR: 2007-2006 5.5HP BRIGGS & STRATTON REVISED: BOM0327 A0937 UNIT ASSEMBLY 7” x 35” 6” x 38” LOWER HOSE UPPER HOSE HB0344...
Page 14
P P P P P MODEL#: 33621208 PECO PECO PECO PECO PECO PECO MOWER NAME: LESCO MOWER MODEL: Z2 MOWER DECK SIZE: 48”, 54” & 60” VAC NAME: 12 CUBIC FOOT PRO 12 FOR YEAR: 2007-2006 6.5 BRIGGS AND STRATTON VANGUARD...
2-11 Blower Cone Installation 2-12 Impeller Blade Removal/Replacement Thread (1) 5/16”-18 jam nut P#(K0120) onto each end of (2) 5/16”-18 x 2-1/2” HHCS P#(K0125). Now partially To Remove: First remove the center bolt (#1), washer thread the bolts into each of the two tabs located on the (#2) and spacer (#3) from the taper-lock bushing (#5).
2-13 Boot To Mower Deck Installation 2-14 Length Of Hose Adjustment Remove the grass deflector (Figure 2-13a) from the The hoses in steps 2-15 and 2-16 must be cut to fit your mower deck by lifting the deflector and removing the machine.
2-17 Lower Hose To Boot Installation CUB CADET Take the unattached end of the lower hose and slide it Fasten the weight brackets P#(B0026) to the weight over the circular end of the boot. Use the lower hose P#(B2220) using (2) 1/2”-13 u-bolts P#(K0331) and (4) clamp to secure the hose to the boot (Figure 2-17).
2-19 Throttle Cable Installation Figure 2-19d To install the throttle cable kit to the box assembly, align the large end of the slot in the throttle base plate (Figure 2-19a) with the rivets located on the front of the box assembly frame (Figure 2-19b).
* Mow twice, at different height settings, (high, then low), been torn or worn through, replace with genuine if grass is extra tall. PECO parts. * Remember that horsepower requirements will vary with the mowing conditions such as type and height of turf...
SECTION V PARTS AND SERVICE 5-1 Parts And Service Information PECO collection system owners should record the name and telephone number of their Service Center. Your Service Center will be happy to supply replacement parts, accessories, and do any service or repairs to your collection system.
SAFETY DECALS To promote safe operation, PECO supplies safety decals on all products manufactured. Damage can occur to safety decals either through shipment, use or reconditioning. Contact your local Service Center for replacement decals. Part #: R4027 Part #: R1053...