Frame Gusset Installation - Peco 22131501 Operator's Manual

Frame Gusset Installation

Position the Frame Gusset (Item #1) behind the Rear Frame Bracket & Lower Right Frame Bracket aligning the bolt
holes of the Frame Gusset to the top bolt holes of those on the Rear Frame Bracket & Lower Right Frame Bracket.
Refer to Figure A.
Secure the Frame Gusset by using (3) 3/8"-16 x 1" Carriage Bolts (Item #2) and (3) 3/8"-16 Ny-Flange Lock Nuts
(Item #3). Refer to Figure B.
For Engine Driven Units, only the top Frame Gusset is needed and will be fully secured during this step.
For PTO-X Drive Units
procedures for the second bottom Frame Gusset. Refer to Figure A & Figure B. The Frame Gussets for the PTO-X
Drive Units will be fully secured during the PTO Mount Arm Installation on page 11.
Note: Some parts and part features have been hidden from view for visual clarity. The total amount of components
needed for each specific Drive will be specified in Figure B within their respective Drive Specification.
Figure A
Figure B
10
, a second Frame Gusset needs to be installed below the top Frame Gusset. Repeat the same
Engine Drive
Additional component for
PTO-X Drive Units
PTO-X
Fully Secure Top Frame Gusset
for Engine Drive Units