Table of Contents
Advertisement
1
2
Fig. Forward/Reverse lever
1. Plate
2. Attachment screws
Figure. Cooling water container
1. Filler cap
2. Level marking
2021-12-14
Controls - Lubrication
Lubricate the forward/reverse lever mechanism.
Remove the cover/plate (1) by loosening the screws
(2) on the top, and lubricate the mechanism under the
cover/plate with oil.
Check - Coolant system
Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
1
specification.
Take great care when opening the radiator cap
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
while the engine is hot. Wear protective gloves and
goggles.
goggles.
2
Also check the freezing point. Change the coolant
Also check the freezing point. Change the coolant
every other year.
every other year.
4812162001_D.pdf
Maintenance measures - 500 h
99
Advertisement
Table of Contents
