Table of Contents
Advertisement
No
No
Designation
Designation
25.
25.
Warning lamp, parking brake
Warning lamp, parking brake
26.
26.
Fuel level
Fuel level
27.
27.
Warning lamp, water temperature
Warning lamp, water temperature
28.
28.
Warning lamp, battery charging
Warning lamp, battery charging
29.
29.
Warning lamp, glow plug
Warning lamp, glow plug
30.
30.
Hourmeter
Hourmeter
31.
31.
Parking brake On/Off, switch
Parking brake On/Off, switch
32.
32.
Motor diagnostics
Motor diagnostics
33.
33.
Motor diagnostics
Motor diagnostics
34.
34.
Water separator
Water separator
35.
35.
Regeneration parked
Regeneration parked
36.
36.
Regeneration parked, Switch
Regeneration parked, Switch
2021-12-14
Symbol
Symbol
Function
Function
The lamp lights when the parking brake is activated.
The lamp lights when the parking brake is activated.
Shows the fuel level in the diesel tank.
Shows the fuel level in the diesel tank.
The light comes on if the water temperature is too high.
The light comes on if the water temperature is too high.
If the lamp lights while the engine is running the
If the lamp lights while the engine is running the
alternator is not charging. Stop the engine and locate
alternator is not charging. Stop the engine and locate
the fault.
the fault.
The lamp must go out before the starter switch is
The lamp must go out before the starter switch is
moved to position 3c for activation of the starter motor.
moved to position 3c for activation of the starter motor.
Shows the number of hours the engine has run.
Shows the number of hours the engine has run.
To activate the brakes, press the top of the switch to
To activate the brakes, press the top of the switch to
change the position of the lever.
change the position of the lever.
To disengage the brakes, press down the red part at
To disengage the brakes, press down the red part at
the same time as the switch, and change the position
the same time as the switch, and change the position
of the lever.
of the lever.
NOTE: When starting the machine, the parking brake
NOTE: When starting the machine, the parking brake
must be activated.
must be activated.
Always use the parking brake when the machine is
Always use the parking brake when the machine is
stationary on a sloping surface.
stationary on a sloping surface.
Control lamp red. Serious fault: Turn the motor off at
Control lamp red. Serious fault: Turn the motor off at
once! Attend to before restarting.
once! Attend to before restarting.
Control lamp yellow. Less serious fault: Attend to as
Control lamp yellow. Less serious fault: Attend to as
soon as possible.
soon as possible.
Yellow control lamp. If the lamp is lit, this indicates that
Yellow control lamp. If the lamp is lit, this indicates that
there is water in the tank.
there is water in the tank.
Stop the roller and drain the fuel filter. (see chapter
Stop the roller and drain the fuel filter. (see chapter
"Maintenance procedures 50h")
"Maintenance procedures 50h")
Yellow control lamp. If the lamp flashes, start a parked
Yellow control lamp. If the lamp flashes, start a parked
regeneration.
regeneration.
Parked regeneration is activated in pressed mode. If
Parked regeneration is activated in pressed mode. If
the indicator in the switch flashes, start a parked
the indicator in the switch flashes, start a parked
regeneration.
regeneration.
4812162001_D.pdf
Machine description
35
Advertisement
Table of Contents
