Table of Contents
Advertisement
1
Fig. Drum, drive side
1. Oil plug
Fig. Drum, vibration side
1. Rubber element
2. Attachment screws
2021-12-14
Drum - oil level
Inspection - filling
Run the roller slowly until the oil plug (1) is aligned
with the semicircular recess in the drum suspension.
Unscrew the plug and check that the oil level reaches
up to the bottom of the hole. Top up with new oil if
necessary. Use oil as specified in the lubricants
specification.
Clean the magnetic oil plug (1) from any metallic
residue, and refit the plug.
Rubber elements and attachment screws
Check
1
Check all rubber elements (1). Replace all elements
where more than 25% of the elements on one side of
the drum have cracks deeper than 10-15 mm (0.4-0.6
in).
Check using a knife blade or pointed object.
2
Check also that the attachment screws (2) are
tightened.
4812162001_D.pdf
Maintenance - 2000h
115
Advertisement
Table of Contents
