Coolers; Checking - Cleaning - Fayat Group DYNAPAC CC1300 Translation Of Original Instruction Manual

Fig. Engine compartment
1. Water cooler
2. Hydraulic fluid cooler
2021-12-14

Coolers

Checking - Cleaning

Make sure that the air flow through the coolers (1) and
(2) is unobstructed. Dirty coolers are blown clean with
compressed air or washed clean using a
high-pressure water cleaner.
Blow air or direct water through the cooler in the
opposite direction to that of the cooling air.
1
Take care when using a high-pressure water jet. Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler. Do not hold the nozzle too near the cooler.
2
Wear protective goggles when working with Wear protective goggles when working with
compressed air or high-pressure water jets. compressed air or high-pressure water jets.
4812162001_D.pdf
Maintenance measures - 250 h
93