Management Terminal Setup Parameters - Cabletron Systems HubSTACK SEHI-34 User Manual

LOCAL MANAGEMENT

6.1.2 Management Terminal Setup Parameters

Table 6-1 lists the setup parameters for the local management
terminal. If your terminal is a Digital Equipment Corporation
VT320™ terminal, press F3 to access the Setup Directory. If you have
a terminal emulation of the VT320™, refer to your equipment user
manual for setup procedures.
Menu
Display Setup:
General Setup:
Communications
Setup:
Keyboard Setup:
Page 6-4
Table 6-1. Terminal Setup Parameters
Columns
Controls
Auto Wrap
Test Cursor
Mode
Cursor Keys
Transmit
Receive
XOFF
Bits, Parity
Stop Bit
Local Echo
Port
Transmit
Auto Answerback
Auto Repeat
Keyclick
Margin Bell
Warning Bell
Auto Answerback
Function Selection
80 Columns
Interpret Controls
No Auto Wrap
Cursor
7 Bit Control
Normal Cursor Keys
Transmit = 9600
Receive = Transmit
any option
8 Bits, No Parity
1 Stop Bit
No Local Echo
DEC-423,
Data Leads Only
any option
No Auto Answerback
any option
any option
Margin Bell
Warning Bell
No Auto Answerback