Connecting The Local Console Manager; Lcm Commands - Cabletron Systems 3E02-04 User Manual

Chapter 3: Configuring
maintained in non-volatile memory and are saved across power cycles.
Filtering information is covered in the ATX User Guide.

3.2 CONNECTING THE LOCAL CONSOLE MANAGER

Connect the Local Console Manager (LCM) to the ATX. Refer to
Chapter 2, Connecting to the Network, of the ATX User Guide for
specific instructions.
Make sure the ATX is powered on and press a few times. When
<Return>
the ATX > prompt appears, LCM is ready to use.

3.3 LCM COMMANDS

To configure an Ethernet Switch Module, refer to the ATX User Guide for
LCM commands generic to all modules. Familiarize yourself with LCM
before configuring the module. Specific instructions for displaying the
port status are given in Chapter 4, Monitoring.
Page 3-2 Ethernet Switch Module User Guide