Last Resort Shutdown Procedure - Enterasys Matrix 7GR4202-30 Hardware Installation Manual

Last Resort Shutdown Procedure

To reset a DFE module without it performing an orderly shutdown routine,
press and hold the OFFLINE/RESET switch for approximately 6 seconds.
Pulling any DFE module out of the chassis before it has been shut down is not recommended. The
only safe time to pull a module out of the chassis is after the completion of a shutdown and the
management LED is flashing amber/off.
Caution: This method of shutting down a DFE-Diamond module is not recommended except as a
last resort, because all processes currently running on the module will be interrupted resulting in
loss of frames.
Precaución: No se recomienda utilizar este método para apagar los módulos DFE-Diamond.
Recurra a él sólo como último recurso, puesto que interrumpe todos los procesos del módulo en
funcionamiento, lo que podría resultar pérdidas de frames.
Last Resort Shutdown Procedure
Matrix DFE-Diamond Series Installation Guide 4-7