Administration- System Information; Logout; Figure 32- System Information Page - NTI SPLITMUX-USB4K-4RT Installation And Operation Manual

Quad screen 4k multiviewer

Hide thumbs Also See for SPLITMUX-USB4K-4RT:

Table of Contents

SPLITMUX Quad Screen 4K Multiviewer

Administration- System Information

The System Information page provides firmware version, serial number (version 1.1 and later), MAC address, network settings

and input connection status for the SPLITMUX. This information is particularly helpful when the IP mode is set to "DHCP With

Failover" (the default setting) because it displays the DHCP server-assigned settings, regardless of the network setting applied on

the Network Configuration page (page 20) which only apply when the IP mode is set to "Static".

Note: The System Information page always shows the assigned IP address whether the IP Mode is set to "Static" or

"DHCP with Failover". (See page 20)

This information is also easily accessed from the OSD screen using the front

panel buttons.

To logout of the SPLITMUX, click on the Logout link in the left menu.

This will return you to the login screen.

Table of Contents

Do you have a question about the SPLITMUX-USB4K-4RT and is the answer not in the manual?