Dash Up To Serial #179501; Horn Switch; Forward-Off-Reverse Switch; 3A) Light Switch - Taylor-Dunn B0-248-48AC Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

VEHICLE CONTROLS

DASH UP TO SERIAL #179501

1) Horn Switch

The horn switch is located on the right side of
the instrument panel. Depress the switch to
sound the horn, release it to turn it off.

2) Forward-Off-Reverse Switch

The forward-off-reverse switch, located on
the right side of the instrument panel,
determines the direction of travel of the vehicle. Push
the top of the switch to engage the forward direction.
Push the bottom of the switch to engage the reverse
direction.
DO NOT SWITCH from forward to reverse or vice-
versa while the vehicle is in motion. Make sure the
vehicle is completely stopped before shifting.
The forward-off-reverse switch should be in the center
"OFF" position, with the key-switch off and the park
brake set whenever the operator leaves the vehicle.

3a) Light Switch

The headlight switch is located on the top left of the
instrument panel. Push the right side of the switch to
turn the lights on. Push the left side of the switch to
turn the light off.

3b) Hi-Low Switch

The high-low switch is located on the lower left of
the instrument panel. Toggle the switch lever up for
normal speed. Toggle the switch lever down for slow
speed.

4) Combination Display

Functions for the Combination display are listed on
the following pages.

5) Accessory Switches (optional)

The optional accessory switches are located on the
left side of the instrument panel. The function of the
optional accessory switches will vary depending how
the vehicle is equipped.

6) Key-Switch

A key-switch, located on the right center side of the
instrument panel, turns on the vehicle. Rotate the
key clockwise to turn the vehicle power on,
counterclockwise to turn the vehicle power off.
The key-switch should be in the "OFF" position
whenever the operator leaves the vehicle.
This switch is also designed to secure and disable
the vehicle. The key can only be removed when the
key-switch is in the "OFF" position.

7) Emergency Stop Switch

The emergency stop switch will immediately and
abruptly stop the vehicle.
The Emergency Stop Switch will stop the vehicle but
will still allow some functions to work such as the
parking brake bypass switch.
Do not depress the Emergency Disconnect
Switch while the vehicle is in motion unless
the vehicle must be stopped in an emergency.
Depressing the switch will immediately apply
the park brake, stopping the vehicle. The
abrupt stopping of the vehicle may result in
severe bodily injury.
Safety Rules Page 5