Monitoring Functions; Current Conditions; Run Time Histories - Airstream Cumberland EXPERT LA User Manual

EXPERT LA
12.

MONITORING FUNCTIONS

12.1 Current Conditions

The current condition menu gives a quick view of
the actual conditions in the barn.
Select:
Main menu
• The current conditions (inputs and output)
are shown on screen. Use the arrow keys to
scroll the display.
Set Points
Ambient
Min. Vent.
Current Stage
Current Probe
Vent/Inlet
Set Point
Inside Humidity
History
Outside Humidity
Static Pressure
Age/Mortal
Outside T°
Heating Stages
Clean Mode
Clock Output
Vent/Inlet 1 Position
Start/Stop
Vent/Inlet 2 Position
Running Prog:
Monitoring
Temperature Probe 1
Temperature Probe 2
Program
Temperature Probe 3
Selection
Temperature Probe 4
Setup
Yesterday Water 1
Yesterday Water 2
Time/Date
Yesterday Water 3
72
EXPERT LA rev.00
Main menu
Current conditions
Temperature 72.3 °F
2
Set 1
70.0 °F
Low %
Low %
.000 "WC
High °F
xx
xx
0 %
0 %
Program 1
72.3 °F
72.4 °F
72.3 °F
72.1 °F
0 Gal
0 Gal
0 Gal
Use to navigate

12.2 Run Time Histories

Monitoring menus contain the daily run time of the
feeders & heaters. The controller keeps these daily
run times in memory for 75 days and logs these
values into monitoring menus at midnight.
Select:
Main menu
Monitoring
Select the desired monitoring menu:
- Feeders
- Heaters
Heater 1 Run time 75 days
Total
Today
May 02 200X
May 01 200X
Resetting the run time of a feeder
To reset the run time of a feeder, select the
following menus then follow the prompts on screen.
Select:
Main menu
Monitoring
Feeders
Reset Run Time
Main menu
Monitoring
Heater
150 min
25 min
27 min
30 min
Use to navigate