CONTROLLER FUNCTIONS
Clock Settings
•
Select "CLOCK" using the function selection buttons.
•
Press the right-arrow key once. The hours flash on the display.
•
Use the adjustment buttons to set the hours to the desired value.
•
Press the right-arrow key. The minutes flash on the display.
•
Use the adjustment buttons to set the hours to the desired value.
Identification Number
This function displays the identification number of the TC5-ITA along with
its primary/slave status. The identification number is set using jumpers on
the COMLINK-2 communication card (see INSTALLATION PROCEDURE
chapter).
To display the identification number:
•
Select "IDENTIFICATION NUMBER" using the function selection
buttons. The identification number is displayed, alternating with
"ID" and "PRI" or "SLA" for a primary or slave unit.
20
TC5-ITA rev.02