Table of Contents
Advertisement
EXPERT LA
4.7
Probe Setup
4.7.1
Probe Activation
Follow these steps to enable or disable the probe
inputs.
Select:
Main menu
Setup*
User
Probes
*
A password may be required to access this menu (sec. 4.2).
•
Enable or disable the following probe inputs:
The following parameters are com-
mon to all programs of the controller.
Inside probe
Select the number of inside temperature
probes that are connected to the controller
(1 to 8 probes).
Inside relative humidity (RH) probe
Select "Yes" if an indoor humidity probe is
connected to the controller.
Outside relative humidity (RH) probe
Select "Yes" if an outdoor humidity probe is
connected to the controller.
24
EXPERT LA rev.00
Probe Selection
Number of Inside Probe
Use Inside RH Probe?
Use Outside RH Probe?
# Water Meter
Nb Outside T° Probe
use SP Probe?
Use
Water meter
Enable the desired number of water meter
inputs (1 to 9). Note that the controller only
has 1 built-in water meter input. Connect
water meters 2-9 to a WME-8 external wa-
ter meter module.
Outside T°
Select the number of outside temperature
probes that are connected to the controller
(0 to 2 probes).
Static pressure (SP) probe
Select "Yes" if a static pressure sensor is
connected to the controller.
Main menu
Setup
User
Probes
4
Yes
Yes
8
2
Yes
to navigate
Advertisement
Table of Contents
