Table of Contents
Advertisement
EXPERT LA
6.5.2.2 Static-Pressure-Based Vent Door (Inlet)
Settings
Select:
Main menu
Vent/Inlet*
Vent door / Inlet 1 is already displayed; press
Vent door / Inlet 2 to display parameter set-
tings of the second inlet.
*
Accessible if at least one vent door (inlet) output enabled in
the Installation Setup (section 4.5). A password may also
be required to access this menu (section 4.2).
Make sure you have selected a static-
pressure-based vent door (inlet). Refer
to section 4.5 to set vent door (inlet)
functions.
•
Set the following parameters:
(Refer to the previous section to get further infor-
mation on these parameters).
Wind Effect Delay
Select what delay must elapse before mov-
ing the vent door (inlet) when the pressure
level exceeds a pressure set point.
Pre-opening Delay
Set the time that is required to pre-open the
vent door (inlet) before activating minimum
ventilation fans. Adjustable from 0 to 30 sec-
onds.
56
EXPERT LA rev.00
Vent Door/
Vent Door /Inlet 1 Settings
Inlet 2
Wind Effect Delay
Auto Reset
PreOpening
Use
to navigate
Main menu
Vent/Inlet
0:30 m:s
15 sec
Advertisement
Table of Contents
