Table of Contents
Advertisement
EXPERT LA
14.
MEMORY CARD
14.1 Principle of Operation
The memory card allows you to upgrade the firm-
ware or software of your controller without loos-
ing your parameter settings (firmware and/or soft-
ware upgrade). The card can also be used to make
a backup of your controller settings or to copy these
settings on another controller of the same type.
Memory
Card
Connector
Cover
Front
Panel
Various kind of files can be stored on the card:
configuration files (*.cfg files) and/or firmware files
(*.fir and *.bin files). Refer to section 14.3 to load
or save a configuration file; refer to section 14.4
to upgrade the firmware.
14.2 Access the Transfer Menu
1.
Unscrew the screws located on the
controller's front panel then open the panel.
2.
Insert the memory card in the connector lo-
cated on the electronic board located on the
back of the front panel (see illustration).
3.
Close the front panel then simultaneously
press the up- and down-arrow keys for 3 sec-
onds to display the transfer menu.
Select the desired transfer menu:
Memory Card
or
Controller
Exit
EXPERT LA rev.00
Controller
Memory Card
Memory card Menu
Memory card
Controller
Controller
Memory card
77
Advertisement
Table of Contents
