Table of Contents
Advertisement
EXPERT LA
•
Back
Press BACK to return to the previous menu.
•
Main LCD Screen
The large LCD screen is used to display the
various parameters and menus. The contrast
of the screen can be adjusted using the po-
tentiometer located behind the display. Open
the front panel to access the potentiometer.
-
+
LCD CONTRAST
POTENTIOMETER
•
LED Display
This display shows the current reading of
chosen sensor(s). Refer to section 4.5 to
select what information needs to be shown
on the LED display.
•
Status Leds
Status pilot lights indicate the current sta-
tus of the outputs. Refer to section 3.4 for
further information about these LEDs.
•
Backlight button
Press this button to light up the LCD screen.
3.2
Parameter Adjustment
Use navigation buttons to select the desired pa-
rameter on the main screen. A parameter that
can be modified blinks when it is selected; non-
blinking parameters cannot be changed.
12
EXPERT LA rev.00
3.3
The user interface of the controller can be displayed
in multiple languages. Follow these steps to change
the language selection:
Select:
Main menu
More, Otros or Outros
English, Español or Português
Backlight
Button
•
The controller automatically changes the lan-
guage display.
Language Selection
User Settings
Monitoring
Program
Selection
Setup
Time/Date
Español
Português
Use
to navigate
Press and hold the main menu
button for 5 seconds to switch
the language selection.
Main menu
Advertisement
Table of Contents
