EXPERT LA
14.4 Firmware Update
Firmware Files (*.fir)
The controller's firmware contains instructions and
data responsible for controlling the controller. When
a new firmware version is available, you can install
it in your controller by downloading a firmware file
(*.fir) from the card. Upgrading the firmware will
not affect your parameter settings.
•
Access the transfer menu as explained in
section 14.2 and select the "Memory card
to controller" menu.
•
Press and hold the up- and down-arrow keys
simultaneously for 3 seconds. The Firmware
Update menu is displayed.
•
Read the warning message carefully then
press Next.
It is extremely important
Next
to ensure that the AC power
source is not interrupted
during this process.
This unit may render
inoperable if power fails
during this update.
To continue this process,
press NEXT.
Exit
•
Select the proper firmware file (*. fir) on
the main screen. The
files can be used for the transfer.
Select
File_name.cfg
atm_0_7_30.bin
Exit
Main Menu
Card/Ctrl
Firmware
FIRMWARE UPDATE
WARNING!!!
icon indicates which
Main Menu
Card/Ctrl
Firmware
FIRMWARE UPDATE
atm_0_7_30.fir
•
Press "Select" to get information about the
selected firmware file (*.fir).
Install this firmware?
Name = Atm Advanced
Yes
Version= x.y.zz
ReleaseDate=2006-01-01
No
ModelVersion=0x111A
•
Press "Yes" to install the selected firmware
or select "No" to go back to the previous
menu.
•
Once the transfer is over, press Exit then re-
move the memory card from the connector.
14.5 Erasing the Memory Card
Follow this procedure to delete all the content of
the memory card.
•
Access the transfer menu as explained in
section 14.2 and select the "Controller to
Memory card" menu.
Controller to Memory card
Complete
Erase card
Exit
•
Press "Erase card" to delete all files that are
stored on the card.
•
Once the card is erased, press Exit then re-
move the memory card from the connector.
EXPERT LA rev.00
Main Menu
Card/Ctrl
Firmware
FIRMWARE UPDATE
Mem.Card
Ctrl/card
79