EXPERT LA
5.3.3
Curve Offset
The curve offset parameter allows you to adjust
the value of all curve points while the curve is run-
ning.
Select:
Main menu
Set Point
Curve offset parameters are only dis-
played while the set point curve is
running.
•
Set the following parameter:
Set point curve offset
Select the number of degrees that need to
be removed or added to all steps of the set
point curve (+/- 10°F).
Accessible if the set point curve is currently run-
ning.
36
EXPERT LA rev.00
SetP Curve
Set Points
Set Points
Current
Day
Night
Clean Mode
Outside
Curve Offset
Use
to navigate
Main menu
Set Point
75.5 °F
70.0 °F
75.5 °F
35.0 °F
75.0 °F
0.0 °F