Table of Contents
Advertisement
EXPERT LA
Show settings of:
Even when a program is running you can still
display parameter settings of other programs
without changing the program in use. Se-
lect the desired program to be displayed on
screen.
Only programs that are enabled in the Installation
Setup are available (see sec. 4.5).
Running program:
This message is shown when the program
selection is made manually (i.e., it is not se-
lected as a function of the day and/or out-
side temperature). Select the running pro-
gram.
Only programs that are enabled in the Installation
Setup are available (see sec. 4.5).
The day number refers to
the animal age.
4.3.2
Copying & Pasting Programs
Use the copy-paste function to duplicate all param-
eter settings associated to a program onto another
program. This avoids repeating the same program-
ming sequence several times.
Select:
Main menu
Setup*
Copy/Paste
*
A password may be required to access this menu (sec. 4.2).
Copy From:
Copy to:
Confirm?
•
Copy From:
Select the source program. The one that will
be duplicated.
•
Copy to:
Select the target program. The one on which
the copied program will be pasted.
•
Once a different source and target programs
are selected, the message "Confirm?" is dis-
played. Select "Yes" to start the program
duplication. The message " Copy in
progress" is displayed. Wait until the data
transfer is over.
EXPERT LA rev.00
Main menu
Setup
Copy/paste
Program Settings
Program 1
Program 2
No
Use
to navigate
17
Advertisement
Table of Contents
