EXPERT LA
5.3
Temperature Set Point
Curve
5.3.1
Principle of operation
The controller can automatically adjust the target
room temperature (day set point) over time by us-
ing a curve.
A curve is composed of 10 steps. Each step speci-
fies a day number and a temperature set point for
that day (the day number refers to the animal age).
Once the curve is activated, the controller changes
the set point every hour in a linear fashion between
consecutive steps of the curve. When the last step
is reached, the controller keeps using the tempera-
ture set point associated to that day.
SET POINT (°F)
78
76
74
72
70
68
66
64
62
60
DAY -5
DAY 0
34
EXPERT LA rev.00
Set Point Curve
DAY 10
DAY 15
DAY 20
DAY 25
Notes
Certain restrictions apply to reduce the
risk of errors:
- The highest possible day number is 450.
- Decreasing day numbers is not allowed.
- All ten steps must be specified. If you don't
need ten different steps, repeat the last tem-
perature for each unnecessary step.
DAY 30
DAY 35
DAY 40
DAYS