Table of Contents
Advertisement
EXPERT LA
14.3 Configuration Transfer
Configuration Files (*.cfg)
Configuration files are a set of instructions that
tells the controller what to do. These files are di-
vided into two parts:
1) Software (screen menus)
2) User data (parameter settings)
14.3.1 Installing a New Configuration
The following procedure shows how to install a new
configuration in your controller. You can choose to
install the whole new configuration or to install a
specific component of it.
•
Access the transfer menu as explained in
section 14.2 and select the "Memory card
to controller" menu.
•
Select the proper configuration file (*. cfg)
on the main screen. The
which files can be used for the transfer.
•
Press the button that corresponds to the
component(s) you want to install:
Complete (all components)
Software (screen menus)
User data (parameter settings)
Memory card to controller
Complete
Software
User Data
Exit
•
Once the transfer is over, press Exit then re-
move the memory card from the connector.
78
EXPERT LA rev.00
icon indicates
Mem.Card
Card/ctrl
File_name.cfg
atm_0_7_30.bin
atm_0_7_30.fir
You can save your controller's configuration on the
card or you can install a new configuration into
your controller. Note that it is now possible to in-
stall a specific component of the configuration with-
out affecting the other component. For instance,
you can upload new controller software without
affecting your parameter settings.
14.3.2 Saving a Configuration on the Card
The following procedure shows how to save your
controller's configuration into the memory card.
This will create a configuration file (*.cfg) on the
card.
•
Access the transfer menu as explained in
section 14.2 and select the "Controller to
Memory card" menu.
•
The name of the configuration file (*.cfg) is
shown at the top of the screen and the table
at the bottom gives information about the
memory card. Press "Complete" to save your
controller's configuration on the card.
Controller to Memory card
File_name.cfg
Complete
Total :
Used
Erase card
Free
Exit
•
Once the transfer is over, press Exit then re-
move the memory card from the connector.
Mem.Card
Ctrl/card
MS300
8192 KB
:
0 KB
:
8192 KB
Advertisement
Table of Contents
