Factory Settings - Airstream TC4-2N6F User Manual

Factory Settings

T
he controller is programmed at the factory with the settings shown
below. Keep the settings that are convenient for you and make changes
where necessary.
(1)
NOTES:
(2)
TEMPERATURE
SET POINT
STAGE 1 FANS
STAGE 2 FANS
CURTAINS
STAGE 3&5 FANS
MIST
HEATERS
16
TC4-2N6F.rev.07
The controller only memorizes the last parameter settings.
Each new setting replaces the preceding one.
If the power supply is cut off, the last parameter setting will
be kept in memory until the power is restored.
PARAMETER
Room set point
Outside set point
Minimum speed
Time on
Time off
Band width
Minimum speed
Differential
Time on
Time off
Dead band
Differential 3 and 5
Time on
Time off
Differential
Differential
Offset
FACTORY SETTING
75.0°F (23.9°C)
60.0°F (15.6°C)
40 %
15 seconds
0 seconds
2.0°F (1.1°C)
40 %
2.0°F (1.1°C)
30 seconds
90 seconds
2.0°F (1.1°C)
2.0°F (1.1°C)
1 minute
15 minutes
10°F (5.6°C)
2.0°F (1.1°C)
2.0°F (1.1°C)