Datasat AP25 Installation And Operating Manual page 57

Menu (System) > USB Save/Restore
Figure 29. USB Save/Restore Screen
Select an activity on the left, then touch Copy on the right.
The following options are available when using a USB Flash drive:
Table 12. USB Flash Drive Options
OPTION
Save AP25
Configuration
Save Master
Configuration
Save Diagnostic
Information
Load AP25
Configuration
Load Master
Configuration
Load ScreenSaver
AP25 Installation & Operating Guide
AP25 Installation and Operating Guide
RESULT
Save AP25 configuration to USB device. This will erase from the USB device
any previous configuration stored for this unit.
Save AP25 configuration to USB device as a MASTER configuration which
may be loaded onto other AP25 units. This will erase from the USB device
any existing MASTER configuration.
Save AP25 Diagnostic information to the USB device to facilitate
troubleshooting.
Copy AP25 configuration from a USB device to system. This will ERASE the
existing configuration on the AP25 and cause a system restart after loading
the new configuration.
Copy AP25 MASTER configuration from a USB device to system. This will
ERASE the existing configuration and cause a system restart after loading
the new configuration.
Load a graphic image (AP25.jpg) from the USB device and use it as the
ScreenSaver.
The screensaver image is an 800 wide x 480 high jpeg image. The file must
be named "AP20.jpg" and placed in the root directory of the USB device.
Document # 9301H79500 Ver. 1.00
Page 57