Datasat AP25 Installation And Operating Manual page 142

Create Optical Formats
To create an optical format, copy an existing format. Go to:
Menu (System) → Formats → Edit Formats
Press the Copy Format button.
Select a format from the drop down menu of Copy Format From (in Figure 3, above, "DCin" is
selected to copy)
Press the to Format box and type in a new format name: Mono, A-Type, or SR (in Figure 3,
above, "SR" has been entered).
Press the Copy button. Repeat for other desired optical format(s).
F3.2. Assign Optical Formats to Format Buttons
After creating the optical formats, they may be assigned to "Format Buttons". The format buttons
will then appear on the Home screen and be available for selection. In Figure 4 below, SR is
selected.
Appendix F. H338 Optical Film Card Option
AP25 Installation and Operating Guide
Figure 3– Copy Audio Format
Figure 4 – Home Screen – SR format
F-3
Version 1.00
Document #: 9301H79500 Ver. 1.00