Datasat AP25 Installation And Operating Manual page 165

11. Master Fader Mute
Command: @MUTED<space>[New Value]<CR>
Response:
MUTED<space>[Value]<CR>
Mute or Unmute the AP25 output.
Parameters
[New Value]
[Value]
Example
Mute
Send:
Receive:
12. Monitor Level
Command: @MONITORLEVEL<space>[New Value]<CR>
Response:
MONITORLEVEL<space>[Value]<CR>
Set or read the AP25 monitor level.
Parameters
[New Value]
[Value]
Example
MONITORLEVEL
Send:
Receive:
Appendix H. Serial Command AP!
AP25 Installation and Operating Guide
1 to mute, 0 to unmute.
Current mute value.
MUTED 1
MUTED 1
0 (minimum) to 100 (maximum).
Current monitor level value.
MONITORLEVEL 70
MONITORLEVEL 70
H-9
Version 1.00
Operation
Read/Write
Operation
Read/Write
Document #: 9301H79500 Ver. 1.00