Datasat AP25 Installation And Operating Manual page 12

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Caution Notices
Power Cord to the AP25 rear panel: The power cord is the main disconnect device. It should
be plugged into an easily accessible outlet with surge protection. The power cord is to be
used in a minimum type SVT 18/3 rated 250 Volts AC, 10 Amps with a maximum length
of 4.5 M, with one end terminated in an IEC 320 attachment plug and the other end
terminated in a NEMA 5-15P Plug.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases shall be placed on the apparatus
WARNING: This apparatus is a Class I product. This product must be connected to a mains
socket outlet with a protective earthing connection.
Only use at altitude not exceeding 2000m. This requirement is for China only under
China national differences GB 8898-2011.
警告"选用同型号规格的锂电池"
警告
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要
用户对其干扰采取切实可行的措施。
AP25 Installation & Operating Guide
AP25 Installation and Operating Guide
Document # 9301H79500 Ver. 1.00
Page 12