How-To Procedures For Setup; Format Option - Datasat AP25 Installation And Operating Manual

3.0

How-To Procedures for Setup

This table provides a list of setup activities and provides instructions or a link to instructions elsewhere
in this manual.
Table 11. Setup Procedures
ACTIVITY
Assign a Format button
Unassign / delete a Format
button
Configure power-on Format
(Startup Format)
Assign fader level to a Format
or set global fader for all
Formats
Create a Format
Assign Channel Names and Vu
meters
Set Non-sync Level and Non-
sync Routing
USB Save / Restore / Load
Load a personalized screen
saver
Set up Global Audio Delay for a
format
Set up Multiple Surround
Channels
Set up HDMI option
View AP25 System information
Update AP25 software
3.1 Example: Creating a Format
Prior to creating a format, it is necessary to identify the following:
Input source

Format option

EQ set up
Output channel profile name
AP25 Installation & Operating Guide
AP25 Installation and Operating Guide
INSTRUCTIONS
See 4.3.4 Assign Format Buttons, page 65.
See 4.3.4 Assign Format Buttons, page 65 – select the button
and assign a "blank" format to it.
See 4.3.2 Startup Format, page 63.
See 4.2 System Setup Screen, page 51 "Fader Control", and see
0
Assign Fader Level to a Format, page 52.
See 3.1 Example: Creating a Format, below.
For detailed information about Formats, see
page 27.
See 4.3.8.3 Channel Names, page 86.
See 4.3.6.3 NonSync Level and Routing, page 72.
See also 0
Assign Fader Level to a Format, page 53.
See 4.2.3 Saving and Restoring Configuration Files, page 56.
See 4.2.3 Saving and Restoring Configuration Files, page 56. To
set screensaver time and mode, see 4.2 System Setup Screen,
page 51.
See 4.3.6.1 Global Delay, page 69.
For digital cinema format, see 4.3.6.2 Extended Surround
Options, page 71.
For digital cinema format, see HDMI Options, page 76
See 4.2.5 System Info, page 59.
See 4.2.2 Updating AP25 Software, page 54.
About Formats,
Document # 9301H79500 Ver. 1.00
Page 44