Factory Presets - Datasat AP25 Installation And Operating Manual

Audio EQ:
Dirac: Enabled or disabled depending on setup and calibration
Third Octave EQ: Calibrated adjustment made by qualified technician
Parametric Equalization: Calibrated adjustment made by qualified technician

2.8 Factory Presets

The AP25 factory settings include formats for Digital Cinema and Nonsync as described in the table
below.
Table 5. AP25 Factory Presets
Format
Name
Digital
Cinema
Nonsync
The default EQ set is named EQ1 and includes all EQ settings flat and all filters off. This EQ set may be
used and altered during the theater setup process. The default channel profile is Profile1, which includes
the default 6 channel assignments and trim values flat.
See appendix F for Optical Film Card option factory presets.
2.8.1 Preset Formats
The default formats appear in the Audio Format Setup screen under the dropdown menu for Current
Audio Format.
To create a format with the same name and source not shown in the table, go to the <Edit Formats>
button on the upper right of this same menu. Any existing format may be copied to a new format. Any
of the format settings may be changed after the format is copied from another. You can also rename or
delete existing formats.
Preset formats may also be selected when copying formats. Select Edit Formats > Copy Preset to
Format and select from the Copy From Preset dropdown menu. Table 6 below lists the available presets.
AP25 Installation & Operating Guide
AP25 Installation and Operating Guide
Assigned Signal Source
Button
1 Digital In (1-16)
2 Nonsync 1
EQ Set Channel
Profile
EQ1 Profile1
EQ1 Profile1
Document # 9301H79500 Ver. 1.00
Page 31