Hook
A
Top tether strap
B
Fixing the top tether strap
■
to the anchor bracket (third
seats)
Install the child restraint system
in accordance to the operation
manual enclosed with the child
restraint system.
Outboard seats
Latch the hook onto the anchor
bracket and tighten the top
tether strap.
Make sure the top tether strap is
securely latched. (P.67)
Hook
A
Top tether strap
B
Center seat
1
If the head restraint interferes
with your child restraint sys-
1-2. Child safety
tem, and the head restraint
can be removed, remove the
head restraint. Otherwise,
put the head restraint in the
upper most position.
(P.183)
2
Latch the hook onto the
anchor bracket and tighten
the top tether strap.
Make sure the top tether strap is
securely latched. (P.67)
When installing the child restraint
system with the head restraint
being raised, be sure to have the
tether strap pass underneath the
head restraint. Do not install child
restraints with V-shaped tether
strap.
Hook
A
Top tether strap
B
■
Laws and regulations pertain-
ing to anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming
to FMVSS213 or CMVSS213 speci-
fications can be used.
This vehicle is designed to conform
to SAE J1819.
73
1