Rear (AWD models)
Type
Maximum output
Maximum torque
Hybrid battery (traction battery)
Type
Voltage
Capacity
Quantity
Nominal voltage
Lubrication system
Oil capacity (Drain and refill
■
reference
4.8 qt. (4.5 L, 4.0 Imp.
With filter
qt.)
Without fil-
4.4 qt. (4.2 L, 3.7 Imp.
ter
qt.)
*
: The engine oil capacity is a refer-
ence quantity to be used when
changing the engine oil. Warm up
the engine and turn off the hybrid
system, wait more than 5 min-
utes, and check the oil level on
the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is
used in your Toyota vehicle.
Use Toyota approved "Toyota
Genuine Motor Oil" or equiva-
lent to satisfy the following
grade and viscosity.
Oil grade:
Permanent magnet synchronous motor
40 kW
89.2 ft•lbf (121 N•m, 12.3 kgf•m)
Nickel-Metal hydride battery
7.2 V/module
6.5 Ah (3HR)
40 modules
288 V
*
)
8-1. Specifications
ILSAC GF-6B multigrade engine
oil
Recommended viscosity:
SAE 0W-16
SAE 0W-16 is the best choice
for good fuel economy and good
starting in cold weather.
If SAE 0W-16 is not available,
SAE 0W-20 oil may be used.
However, it must be replaced
with SAE 0W-16 at the next oil
change.
519
8