again to deactivate the cruise con-
trol.
If the cruise control main switch is
pressed and held for 1.5 seconds
or more, the system turns on in
constant speed control mode.
(P.298)
2
Accelerate or decelerate,
with accelerator pedal opera-
tion, to the desired vehicle
speed (at or above approxi-
mately 20 mph [30 km/h])
and press the "-SET" switch
to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment
the switch is released becomes the
set speed.
Adjusting the set speed
Adjusting the set speed by the
switch
To change the set speed, press
4-5. Using the driving support systems
the "+RES" or "-SET" switch
until the desired set speed is
displayed.
1
2
Fine adjustment: Press the switch.
Large adjustment: Press and hold
the switch to change the speed,
and release when the desired
speed is reached.
In the vehicle-to-vehicle dis-
tance control mode, the set
speed will be increased or
decreased as follows:
Fine adjustment: By 1 mph (1.6
km/h)
time the switch is pressed
Large adjustment: Increases or
decreases in 1 mph (1.6 km/h)
1 km/h (0.6 mph)
as long as the switch is held
Fine adjustment: By 1 mph (1.6
Increases the speed (Except
when the vehicle has been
stopped by system control in
vehicle-to-vehicle distance
control mode)
Decreases the speed
For the U.S. mainland and
Hawaii
*1
or 1 km/h (0.6 mph)
*2
increments for
Except for the U.S. mainland
and Hawaii
295
4
*2
each
*1
or