Toyota SIENNA 2022 Manual page 494

494
7-2. Steps to take in an emergency
2
Slightly loosen the wheel
nuts (one turn).
3
Turn the tire jack portion
by hand until the notch of the
jack is in contact with the jack
point.
After removing the jack from the
jack holder, turn the jack portion
in the opposite direction to lower
the jack, and then adjust the jack
set position.
The jack point guides are located
on the side of rocker moulding.
They indicate the jack point posi-
tions.
4
Assemble the jack handle
and the wheel nut wrench as
shown in the illustration.
A
5
Raise the vehicle until the tire
is slightly raised off the
ground.
A
6
Remove all the wheel nuts
and the tire.
When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.