Toyota SIENNA 2022 Manual page 298

Distance options
Long
Medium
Short
Resuming follow-up
cruising when the vehicle
has been stopped by sys-
tem control (vehicle-to-
vehicle distance control
mode)
After the vehicle ahead of you
starts off, press the "+RES"
switch.
Your vehicle will also resume
follow-up cruising if the acceler-
ator pedal is depressed after the
vehicle ahead of you starts off.
4-5. Using the driving support systems
Vehicle-to-vehi-
cle distance
Approximately
160 ft. (50 m)
Approximately
130 ft. (40 m)
Approximately
100 ft. (30 m)
Canceling and resuming
the speed control
1
Pressing the cancel switch
cancels the speed control.
The speed control is also canceled
when the brake pedal is depressed.
(When the vehicle has been
stopped by system control,
depressing the brake pedal does
not cancel the setting.)
2
Pressing the "+RES" switch
resumes the cruise control
and returns vehicle speed to
the set speed.
Approach warning (vehi-
cle-to-vehicle distance
control mode)
When your vehicle is too close
to a vehicle ahead, and suffi-
cient automatic deceleration via
the cruise control is not possi-
ble, the display will flash and the
buzzer will sound to alert the
driver. An example of this would
be if another driver cuts in front
of you while you are following a
vehicle. Depress the brake
pedal to ensure an appropriate
vehicle-to-vehicle distance.
297
4