Toyota SIENNA 2022 Manual page 391

Keep the HomeLink
in view while programming.
4
Program a device.
Programming a device other

than an entry gate (for U.S.A.
owners)
Press and hold the remote con-
trol transmitter button until the
®
HomeLink indicator light
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.
Programming an entry gate

(for U.S.A. owners)/Program-
ming a device in the Cana-
dian market
Press and release the remote
control transmitter button at 2
second intervals, repeatedly,
5-4. Using the other interior features
®
indicator light until the HomeLink
light changes from slowly flash-
ing orange to rapidly flashing
(green) (rolling code) or continu-
ously lit (green) (fixed code).
5
Test the HomeLink
tion by pressing the newly
programmed button and
observing the HomeLink
indicator light:
®
 HomeLink indicator light illu-
minates: Programming of a
fixed code device has com-
pleted. The garage door or
other device should operate
when a HomeLink
pressed and released.
®
 HomeLink indicator light
flashes rapidly: The garage
door opener or other device is
equipped with a rolling code.
To complete programming,
firmly press and hold the
®
HomeLink button for 2 sec-
onds then release it.
 If the garage door or other
device does not operate, pro-
ceed to "Programming a roll-
ing code system".
6
Repeat the steps above to
program another device for
any of the remaining
®
HomeLink buttons.
Programming a rolling code
■
system
Two or more people may be
391
®
indicator
®
opera-
®
®
button is
5