Toyota SIENNA 2022 Manual page 430

430
6-3. Do-it-yourself maintenance
performing initialization, the tire
pressure warning light blinks for
approximately 1 minute and then
illuminates.
If the inflation pressure of each tire
is still not displayed, have the vehi-
cle inspected by your Toyota dealer.
WARNING
■ When initializing the tire pres-
sure warning system
Do not initializing tire inflation
pressure without first adjusting
the tire inflation pressure to the
specified level. Otherwise, the tire
pressure warning light may not
come on even if the tire inflation
pressure is low, or it may come on
when the tire inflation pressure is
actually normal.
Registering ID codes
Every tire pressure warning
valve and transmitter has a
unique ID code. When replacing
a tire pressure warning valve
and transmitter, it is necessary
to register the ID code.
When registering the ID codes,
perform the following procedure.
With 4.2-inch display

1
Park the vehicle in a safe
place, wait for approximately
20 minutes, and then start
the hybrid system.
2
Press or
control switches on the steer-
ing wheel and select
3
Press or
control switches and select
of the meter
.
of the meter
"Vehicle Settings", and then
press and hold "OK".
4
Press or
control switches and select
"TPWS Setting", and then
press "OK".
5
Press or
control switches and select
"Identifying Each Wheel &
Position". Then press and
hold "OK" until the tire pres-
sure warning light starts
slowly blinking 3 times.
The change wheel set mode is acti-
vated and registration is started.
Then a message will be displayed
on the multi-information display.
When registration is being per-
formed, the tire pressure warning
light will blink for approximately 1
minute then illuminate and "--" will
be displayed for the inflation pres-
sure of each tire on the multi-infor-
mation display.
6
Drive straight (with occa-
sional left and right turns) at
approximately 25 mph (40
km/h) or more for approxi-
mately 10 to 30 minutes.
When registration is completed, the
tire pressure warning light will go off
and the inflation pressure of each
tire will be displayed on the multi-
of the meter
of the meter