Toyota SIENNA 2022 Manual page 321

320
4-5. Using the driving support systems
turned off then changed to ON, the
RCD function will be enabled auto-
matically.)
Turning the RCD function
on/off
Use the meter control switches
to enable/disable the RCD func-
tion. (P.112)
4.2-inch display

1
Press or
control switches and select
.
2
Press or
control switches to select
"RCD" and then press "OK".
7-inch display

1
Press or
control switches and select
.
2
Press or
control switches to select
"RCD" and then press "OK".
3
ON and OFF will be switched
when "OK" is pressed.
When the RCD function is disabled,
the RCD OFF indicator (P.95)
illuminates on the multi-information
display.
When a pedestrian is
detected
If the rear camera detection
function detects a pedestrian in
the detection area, the buzzer
and pedestrian detection will
of the meter
of the meter
of the meter
of the meter
operate as follows:
If a pedestrian is detected in
A
area
A
Buzzer: Sounds repeatedly
Pedestrian detection icon:
Blinks 3 times and then stays
on
If a pedestrian is detected in
B
area
B
Buzzer (When the vehicle is
stationary): Sounds 3 times
Buzzer (When the vehicle is
backing up, when a pedes-
trian approaches the rear of
the vehicle): Sounds repeat-
edly
Pedestrian detection icon:
Blinks 3 times and then stays
on
If the system determines that
C
your vehicle may collide with
a pedestrian in area
Buzzer: Sounds repeatedly
Pedestrian detection icon:
Blinks 3 times and then stays
A
B
C
C