Toyota SIENNA 2022 Manual page 292

C Indicators
Operation switches
■
A Vehicle-to-vehicle distance
switch
B
"+RES" switch
C Cruise control main switch
D Cancel switch
E "-SET" switch
WARNING
■ Before using dynamic radar
cruise control with full-speed
range
● Driving safely is the sole
responsibility of the driver. Do
not rely solely on the system,
and drive safely by always pay-
ing careful attention to your sur-
roundings.
4-5. Using the driving support systems
●
Read the following conditions
carefully. Do not overly rely on
this system and always drive
carefully.
• When the sensor may not be
• Conditions under which the
●
●
●
The dynamic radar cruise con-
trol with full-speed range pro-
vides driving assistance to
reduce the driver's burden.
However, there are limitations
to the assistance provided.
correctly detecting the vehicle
ahead: P.300
vehicle-to-vehicle distance con-
trol mode may not function cor-
rectly: P.300
Set the speed appropriately
depending on the speed limit,
traffic flow, road conditions,
weather conditions, etc. The
driver is responsible for check-
ing the set speed.
Even when the system is func-
tioning normally, the condition
of the preceding vehicle as
detected by the system may dif-
fer from the condition observed
by the driver. Therefore, the
driver must always remain alert,
assess the danger of each situ-
ation and drive safely. Relying
solely on this system or assum-
ing the system ensures safety
while driving can lead to an
accident, resulting in death or
serious injury.
Switch the dynamic radar cruise
control with full-speed range
setting to off, using the cruise
control main switch when not in
use.
291
4