Toyota SIENNA 2022 Manual page 485

9
Attach the sticker as shown.
10Check the specified tire infla-
tion pressure.
Tire inflation pressure is specified
on the label as shown. (P.523)
11Start the hybrid system.
(P.233)
12To inject the sealant and
inflate the tire, turn the com-
pressor switch on.
7-2. Steps to take in an emergency
13Inflate the tire until the rec-
ommended pressure is
reached.
The sealant will be injected
A
and the pressure will spike to
between 44 psi (300 kPa, 3.0
kgf/cm
(400 kPa, 4.0 kgf/cm
then gradually decrease.
The air pressure gauge will
B
display the actual tire inflation
pressure about 1 to 5 min-
utes after the switch is turned
on.
• Turn the compressor switch off
and then check the tire inflation
pressure. Being careful not to
over inflate, check and repeat the
inflation procedure until the rec-
ommended tire inflation pressure
is reached.
• If the tire inflation pressure is still
lower than the recommended
2
or bar) and 58 psi
2
or bar),
485
7