Toyota SIENNA 2022 Manual page 142

Using the kick sensor (vehi-
■
cles with Hands Free Power
Sliding Doors)
The Hands Free Power Sliding
Door enables automatic opening
and closing of the power sliding
door by putting your foot under
the portion with a label on the
rocker moulding and moving it
away from the rocker moulding.
When operating the Hands Free
Power Sliding Door, make sure
that the front door (the same
side of the sliding door you
open) is closed, the kick sensor
operation is enabled (P.112)
and you are carrying an elec-
tronic key.
1
While carrying an electronic
key, stand within the smart
key system operation range,
approximately 11.8 to 19.7 in.
(30 to 50 cm) from the rocker
moulding.
Kick sensor
A
Hands Free Power Sliding
B
Door operation detection
area
Smart key system operation
C
detection area (P.165)
3-2. Opening, closing and locking the doors
Label
D
2
Perform a kick operation by
moving your foot to within
approximately 3.9 in. (10 cm)
of the rocker moulding and
then pulling it back.
• When the kick sensor detects
your foot, the buzzer will
sound.
• Perform the entire kick opera-
tion within approximately 1
second.
• The sliding door will not start
operating if your foot remains
and is detected under the
rocker moulding.
• Operate the Hands Free
Power Sliding Door without
contacting the rocker mould-
ing with your foot.
• If another electronic key is in
the cabin or luggage compart-
ment, it may take slightly lon-
ger than normal for the
operation to occur.
Kick sensor
A
Hands Free Power Sliding
B
Door operation detection
area
141
3