Toyota SIENNA 2022 Manual page 66

66
1-2. Child safety
check that it cannot be extended.
7
If the child restraint has a top
tether strap, follow the child
restraint manufacturer's
operation manual regarding
the installation, using the top
tether strap to latch onto the
top tether strap anchor.
(P.71)
8
After installing the child
restraint system, rock it back
and forth to ensure that it is
installed securely. (P.67)
Booster seat
■
1
If installing the child restraint
system to the front passen-
ger seat is unavoidable, refer
to P.62for front passenger
seat adjustment.
2
High back type: If the head
restraint interferes with your
child restraint system, and
the head restraint can be
removed, remove the head
restraint. Otherwise, put the
head restraint in the upper
most position. (P.183)
3
Place the child restraint sys-
tem on the seat facing the
front of the vehicle.
Booster type

High back type

4
Sit the child in the child
restraint system. Fit the seat
belt to the child restraint sys-
tem according to the manu-
facturer's instructions and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Check that the shoulder belt is cor-
rectly positioned over the child's
shoulder and that the lap belt is as
low as possible. (P.35)