Table of Contents
Advertisement
296
4-5. Using the driving support systems
*1
km/h)
or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: Increases or
decreases in 5 mph (8 km/h)
*2
km/h (3.1 mph)
long as the switch is held
In the constant speed control
mode (P.298), the set speed
will be increased or decreased
as follows:
Fine adjustment: By 1 mph (1.6
*1
km/h)
or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: The speed will
continue to change while the switch
is held.
*1
: When the set speed is shown in
"MPH"
*2
: When the set speed is shown in
"km/h"
Increasing the set speed by
the accelerator pedal
1
Accelerate with accelerator
pedal operation to the
desired vehicle speed
2
Press the "-SET" switch
Changing the vehicle-to-
vehicle distance (vehicle-
to-vehicle distance con-
trol mode)
Pressing the switch changes the
vehicle-to-vehicle distance as
follows:
*2
each
*1
or 5
increments for as
*2
each
1
Long
2
Medium
3
Short
If a vehicle is running ahead of you,
the preceding vehicle mark
also be displayed.
Vehicle-to-vehicle dis-
tance settings (vehicle-to-
vehicle distance control
mode)
Select a distance from the table
below. Note that the distances
shown correspond to a vehicle
speed of 50 mph (80 km/h).
Vehicle-to-vehicle distance
increases/decreases in accor-
dance with vehicle speed. When
the vehicle is stopped by system
control, the vehicle stops at a
certain vehicle-to-vehicle dis-
tance depending on the situa-
tion.
will
A
Advertisement
Chapters
Table of Contents
