Toyota SIENNA 2022 Manual page 134

Table of Contents

Advertisement

Vehicles without power back
door
1
Locks all the doors
Check that the door is securely
locked.
2
Unlocks all the doors
Pressing the button unlocks the
driver's door. Pressing the button
again within 5 seconds unlocks the
other doors.
Press and hold to open the win-
*1
dows
and moon roof
*1
: This setting must be customized
at your Toyota dealer.
*2
: If equipped
Using the key
The doors can also be locked
and unlocked with the mechani-
cal key. (P.502)
Switching the door unlock func-
tion (vehicles with entry func-
tion)
It is possible to set which doors the
entry function unlocks using the
wireless remote control. Perform the
switching operation in the vehicle or
within approximately 3.2 ft. (1 m) of
the vehicle.
1
Turn the power switch to OFF.
2
When the indicator light on the
key surface is not on, press and
hold
,
3-2. Opening, closing and locking the doors
*1, 2
,
,
or
for approximately 5 sec-
onds while pressing and holding
.
The setting changes each time an
operation is performed, as shown
below. (When changing the setting
continuously, release the buttons,
wait for at least 5 seconds, and
repeat step 2.)
Multi-informa-
tion dis-
play/Beep
Exterior: Beeps 3
times
Interior: Pings
once
Exterior: Beeps
twice
Interior: Pings
once
Vehicles with alarm: To prevent
unintended triggering of the alarm,
unlock the doors using the wireless
remote control and open and close
a door once after the settings have
been changed. (If a door is not
opened within 60 seconds after
is pressed, the doors will be
locked again and the alarm will
automatically be set.)
In a case that the alarm is triggered,
immediately stop the alarm.
(P.89)
133
Unlocking func-
tion
Holding the
driver's door han-
dle unlocks only
the driver's door.
Holding the pas-
senger's door
handle unlocks all
the doors.
Holding a door
handle unlocks all
the doors.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sienna 2021

Table of Contents