304
4-5. Using the driving support systems
WARNING
• If the surrounding area of a sen-
sor is scratched or dented, or
part of them has become dis-
connected.
●
Do not disassemble the sensor.
●
Do not attach accessories,
stickers (including transparent
stickers), aluminum tape, etc. to
a sensor or its surrounding area
on the rear bumper.
●
Do not modify the sensor or sur-
rounding area on the rear
bumper.
●
If a sensor or the rear bumper
needs to be removed/installed
or replaced, contact your
Toyota dealer.
●
Do not paint the rear bumper
any color other than an official
Toyota color.
The Blind Spot Monitor function
Vehicles that can be detected by the Blind Spot Monitor
■
The BSM function uses radar sensors to detect the following vehi-
cles traveling in adjacent lanes and advises the driver of the pres-
ence of such vehicles via the indicators on the outside rear view
mirrors.
A
Vehicles that are traveling in areas that are not visible using the
outside rear view mirrors (the blind spots)
B
Vehicles that are approaching rapidly from behind in areas that